ALL PRICES IN AUD - FREE SHIPPING WORLDWIDE
The perfect GoPro housing for limiting attention, all flashing cam lights are blocked out, only leaving the LCD visible. Making it ideal for diving, filming where other cams are also filming, or simply for filming pranks and surprises!
Non-reflective black matte finish ensures low visibility.
Stronger rear door locking clip.
Suitable for taking special action or capture footage
Water resistance of 40 meters
Three buttons of Gopro can be pressed with this case, control freely as you want
Around rubber ring for excellent sealing effect
Ideal for diving, surfing, snorkelling, skiing, yacht or other activities
1) It is recommended that you water test every new housing without your cam inside, to ensure it is completely water tight. Speaking from experience, I've had brand new housings that come with new GoPro cams leak, so always test without a cam inside first. A deep bucket or tub is ideal (or pool/ large body of water), submerse the housing as deep as possible, and look for any air bubbles rising that indicate air is escaping through a leak, and where the leak is. If you dont notice any leaks, double check the housing for moisture when you open it back up, in case you missed an air bubble or two. It can never hurt to be thorough!
2) One trick to ensure all seals work well, is apply a petroleum based lubricant to all seals, this includes wiping the back door seal, to ensure it is dust and grit free. And also applying a few drops in the top of each button (all 3) from both sides (inside and out), push the button several times to feel for smooth action, and to work the oil right into the seals. This will both lubricate them, and act as an additional sealant. After this, dab down inside the housing with a clean cloth to ensure theres no drips left over, and housing is completely clean. Re test under water.
NOTE: Please ensure you order the correct housing for your cam.
NOTE: lens filters do not fit this housing.